Universal Remote Control PSX-2 Manuale di Installazione Scaricare il pdf

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1

NOTE: Use PSX Setup to update the

firmware of the PSX first (see page 6)!

Connecting the PSX for configuration:

 When connecting this product to the end users Local Area Network, use a

standard 100 Base-TX base Ethernet hub / switch and a (Category 5 or

above) network cable.

 Only use a crossover cable if connecting directly to a PC.

 If this product has been used in or configured for another network, reset it to

the factory default settings before you start the configuration; Press and

Hold the Reset button for ten seconds, then release.

 If your PC is using the Windows XP embedded firewall or using the firewall

function of a third party security software such as Norton Internet Security,

“disable the firewall function while configuring this product”.

Step 1 - Connect your PC to an Ethernet switch connected to the Local Area

Network.

Step 2 - Connect an Ethernet cable to the dock and the other end of the cable

to the Ethernet switch connected to the Local Area Network.

Step 3 - Connect the supplied AC Power Adapter to the PSX, then plug in the

AC end into an “Always-On” AC outlet.

Step 4 - Launch the PSXSetup software.

Configuring the PSX

Step 1 – Run “PSX Setup” by clicking on the PSX module icon in the TOOLS menu

of CCP.

1 2 3 4 5 6 ... 16 17

Sommario

Pagina 1

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 1 NOTE: Use PSX Setup to update the firmware of the PSX first (see page 6)! Connecting the PSX f

Pagina 2

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 10 Then, go back to the MX-6000 Editor and “Paste” (Ctrl+V) it into the MAC Address field of the

Pagina 3

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 11 Installing URC PSXLink Software on the end-users PC: URC PSXLink software allows the end-user

Pagina 4

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 12 Step 1 – Start the end-users PC and open Internet Explorer. Step 2 - Turn off Windows Firewa

Pagina 5

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 13 Step 2 – Click on the tools button, in the lower right hand corner of the window, to open the

Pagina 6

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 14 Step 2 – The PSXLink window opens up displaying all the iPods present on the network and whe

Pagina 7

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 15 The iTunes program opens up; the iPod becomes visible in the Devices menu and is ready for sy

Pagina 8

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 16 Disconnecting the iPod from iTunes on a network computer: Step 1 – Click on the disconnect bu

Pagina 9

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 17 Trouble Shooting: No connectivity  Check to make sure the blue “power on” indicator light o

Pagina 10

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 2 Step 2 – Once PSX Setup is running, click on the “Search” button to locate PSX’s on the Local A

Pagina 11

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 3 PSX Web Page Interface This PSX also has an embedded web page interface, which can be used to

Pagina 12

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 4 Status Tab The Status tab has two functions, iPod Status and System Status. iPod Status The i

Pagina 13

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 5 Configuration Tab The configuration tab allows you to; change the name of the dock, use DHCP o

Pagina 14

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 6 Reset The Reset screen is used to “Reboot” the PSX or “Reset” it to its factory default configur

Pagina 15

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 7 Front panel PSX label The PSX ships with a Universal Remote Control label in the dock label h

Pagina 16

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 8 Configuring PSX in MX-6000 Editor: In Program Step 1, “Create and Name Devices", use the

Pagina 17

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1 9 You need to enter either the “MAC Address” or the “Static IP Address” of the PSX into the Netwo

Commenti su questo manuale

Nessun commento

Universal Remote Control PSX-2 Manuale di Installazione

Navigare online o scaricare Manuale di Installazione per Networking Universal Remote Control PSX-2. Universal Remote Control PSX-2 Installation manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Universal Remote Control PSX-2